Sales & Customer Services: 01202 673 542

On Sale
Cart
0 items

FAST DELIVERY

PRICE MATCH & QUALITY GUARANTEED

FINANCE AVAILABLE

YX 150cc Engine – Electric Start (Manual) – Kit 5

10 Items In Stock

Vendor
Mini bikes off-road
Regular price
£485.00
Sale price
£485.00
Regular price
Save 0%
Unit price
per 
Tax included. Shipping calculated at checkout.
Click & Collect

Share:

Description

The new generation of 150cc engine from the YX factory. The factory claim 18bhp at the flywheel from this engine & that’s with a stock magneto and not with a rotor kit. Before considering purchasing this engine there are a few things you need to know, your exhaust must have an internal bore of at least 28mm, your back wheel must be heavy duty otherwise it will rip your sprocket clean off.

Why are our engines different to other sellers engines?

Other seller engines:
Engines are sold boxed, un-opened and unchecked and with no adjustments carried out which if left unchecked could cause potential problems and furthermore serious damage.

Our engines:
We carry out a full inspection to ensure all components are present and make all adjustments “Which are always required” to timing and valve clearance settings. We drain the transport oil which is not suitable to use for running your engine.

What does this mean for me?
This means your engine can be fitted straight into your bike with the peace of mind that a professional technician has set it up to run perfectly for its breaking in period, which is the most important point of the engines life……. just add good quality 10w/40 semi synthetic motorcycle oil and away you go.

Engine can be used to upgrade the following:
Pit Bikes, Honda Dax, ST, SS, CUB, Monkey, Z50, Mini Trail, Chaly, ATC 70, ATC 90, the list goes on and on!

Comes complete as follows:
-Complete Genuine YX 150cc engine 18 HP
-All-up 4 speed manual gearbox N-1-2-3-4
-Removable side cases
-Output sprocket
-Racing mini lightweight flywheel with 12v supply

Complete with:
-Starter motor wire
-Inlet manifold with spacers, gaskets and bolts

These engines are 440mm long, 280mm wide. Top mounting is 93mm wide with an 8mm bolt hole, Rear mounting hole is 82mm wide with an 8mm hole. They also have the 4 M8 threaded holes on the underside which are 88mm apart left to right and 44mm apart front to back, These are to hole centres.

Please note: All our engines need to go through a braking in procedure.

Please follow the engine installation guide we include as this will helps you in setting up and getting the most from your new engine.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)