0 items




YX 110cc Engine (Semi-Automatic)

9 Items In Stock

Mini bikes off-road
Regular price
Sale price
Regular price
Save 0%
Unit price
Tax included. Shipping calculated at checkout.
Click & Collect



The new generation of 110cc engine from the YX factory. These engines are absolute bomb proof. The YX 110 engine is one of the most reliable horizontal lay flat engines on the market.

The YX110 is an engine that delivers steady, controllable but ample power, incorporating a semi-automatic gearbox with gears, which is ideal for beginner riders, riding just like a manual bike except you don’t need to use a clutch to change gears. This also means you can put the bike into 2nd gear and hand it to the beginner rider the bike then acts as a Rev & Go, when the rider gains enough confidence they can start changing gears.

Why are our engines different to other sellers engines?

Other seller engines:
Engines are sold boxed, un-opened and unchecked and with no adjustments carried out which if left unchecked could cause potential problems and furthermore serious damage.

Our engines:
We carry out a full inspection to ensure all components are present and make all adjustments “Which are always required” to timing and valve clearance settings. We drain the transport oil which is not suitable to use for running your engine.

What does this mean for me?
This means your engine can be fitted straight into your bike with the peace of mind that a professional technician has set it up to run perfectly for its breaking in period, which is the most important point of the engines life……. just add good quality 10w/40 semi synthetic motorcycle oil and away you go.

Engine can be used to upgrade the following:
Pit Bikes, Honda Dax, ST, SS, CUB, Monkey, Z50, Mini Trail, Chaly, ATC 70, ATC 90, the list goes on and on!

Comes complete as follows:
-Complete Genuine YX110 110cc engine
-All-up 4 speed semi-auto gearbox N-1-2-3-4
-Removable side case
-Output sprocket

Complete with:
-Inlet manifold and spacers
-Kick start
-Gear lever
-12v coil lighting stator (if required)
-5 pin CDI compatible

These engines are 440mm long, 280mm wide. Top mounting is 93mm wide with an 8mm bolt hole, Rear mounting hole is 82mm wide with an 8mm hole. They also have the 4 M8 threaded holes on the underside which are 88mm apart left to right and 44mm apart front to back, These are to hole centres.

Please note: All our engines need to go through a braking in procedure.

Please follow the engine installation guide we include as this will helps you in setting up and getting the most from your new engine.

Customer Reviews

Be the first to write a review